An electric micromotor with an upgrading system, which can be used for both crown cutting as well as endodontic treatment.
The unique technology of “NLZ” employs an all-new micromotor system and expands the possibilities of dental treatment.
Compact size with higher safety & flexibility. The reciprocating mode can be used with a separate handpiece NLZ Endo (6:1) gear head.
Here are some key points:
•Flexible installation style with superior visibility & operability in a compact design.
•With regular, endo & reciprocating modes.
•Can be used for crown cutting as well as for endodontic treatment.
•Reciprocating mode can be used with a separate handpiece NLZ Endo (6:1) gear head.
•Contra-check function: helps detects abnormalities caused by the deterioration of electric attachment.
•Contra-safe function: It stops the motor if heat generation is estimated in the handpiece.
•Microfilter present within the tubing connector catch debris & foreign particles in the water & prevent clogging.
•Simplifies pipe configuration to reduce the risk of water clogging in the motor.
•Brushless Endomotor with Superior performance.
•Speed Range: 100- 40,000 rpm ( upto 2,00,000 rpm while using 1:5 handpiece)
•Endodontic Torque range: 0.3 – 6.0 Ncm ( Max Torque 4.2 Ncm in general mode)
•3 modes: Regular , Endo & Reciprocating with 6 programs setting.
Regular mode: In this mode, handpieces with both 1:1 gear ratio & 1:5 gear ratio can be used.
• When a 1:5 gear ratio handpiece is used, the speed can be increased up to 2,00,000 rpm.
• When a 1:1 gear ratio handpiece is used, the speed range changes to 100 – 40,000 rpm.
Endo mode: In this mode, a handpiece with a 1:1 gear ratio can be used and the speed range is 100- 6,000rpm.
•In endo mode, torque can be adjusted, also Auto-reverse mode gets activated.
Reciprocating mode: For this operation, a separate handpiece NLZ E with gear ratio 6:1 has to be connected.