Class B Autoclave - Runyes Feng 23L with USB Recorder
Ningbo Runyes Medical Instrument Co. Ltd has focussed on Quality management combine with innovative designs of dental equipment. The dental steam sterilizer has the most essential role in the dental clinic for sterilization of dental instruments and prevention of cross-contamination. Runyes has the European Class B autoclave with 23L capacity and upgraded features to make this autoclave the most reliable one.
key features of Most Installed Runyes Feng 23L Autoclave:
B+ cycle for sterilization of implant kit.
Double door lock system to prevent potential danger caused by incorrect operation.
Steam Spray barrier to protect the instruments from damage.
Water filter in the chamber to prevent the drainage pipe from blocking.
Steam generator cleaning program to increase the efficiency of an autoclave.
The cooling condenser in the waste-water tank to prevent the tank from deform under heat.
USB functioning to store sterilization cycle (More than 2000 Flash Cycles)
Reduced Full Cycle Time
B type front loading autoclave with triple Vacuum cycle.
Drying Time Selection 1min & 5min (Default Time 15 min)
Multiple Sensors (Pressure Sensor, Chamber Outer Temperature Sensor, Chamber Inner Temperature Sensors etc..)
Precise Real Time Pressure & Temperature
Friendly operation interface, simple and easy.
-92 Kpa Increased Vaccum Pump Efficiency
B & D test to check the temperature penetration capacity of the sterilizer and Leak test to monitor whether there is leakage.
3 temperature selection : 121⁰ C , 134⁰ C & B+
Sterilization of unwrapped/wrapped, solid/hollow, porous/non-porous instruments can be done.
Step button to select a date, month, year and time to store the sterilization cycle.
2 separate water tanks available: Distilled Bigger water tank with 3.5litre capacity and waste-water tank with 5litre capacity.
The cooling condenser in the waste-water tank to reduce the water temperature and prevent deformation of the tank.
Water quality check sensor / Water level Sensor in the distilled water tank available.
Provision to connect with External Printer (RS232 Port)
Double door lock system i.e. airlock & mechanical lock to prevent potential damage.
B+ cycle in 134⁰ C temperature and sterilization holding time of 18 min for effective sterilization of Implant Kits.
Dual Radiator Fans for Fast Cooling
Aluminium Foil Insulation cotton for better heat preservation
Stainless Steel Connectors in Internal Parts for Corrosion Resistance