The extremely compact design of the K4 Dry Milling Machine edition model provides ensures first-class results with maximum precision even when working with extremely hard cobalt-chromium-based NEM materials.
K4 Edition is equipped with an automatic tool changer for seven tools, which enables the complete machining of a blank without further intervention by the operator.
Key Highlights:
4 Axes
1 Disc
7 Tools
Dry Module
Mill
Highest accuracy
The automatic axis measurement and compensation ensure a consistently high machining precision – and thus top-quality results.
Automatic changer for 7 tools
With K4 edition, you get an automatic tool changer with 7 stations that enable complete machining of the workpiece without manual intervention of the operator.
Worldwide applicable
Due to far range switching mode power supply for 100 – 240 V and 50/60 Hz with country-specific mains plug. Certification according to ANSI/UL61010-1 for exports to the USA and Canada.
Sophisticated protective mechanisms
Protection of the danger zone during the machining process with an automatic safety interlock at the front cover. Protection of the mechanics against dust and chippings as well as reduced wearing and maintenance effort due to the integrated working chamber sealing air concept.
Wide range of materials and indications
Machining of plastics, wax, zirconium oxide and composites up to non-precious alloys on the cobalt-chrome basis. For crowns, bridges (also fully anatomical), inlays, onlay etc.
4 simultaneously working axes
The integrated HarmonicDrive® rotary axes (A axis) has a rotary range of 360 degrees
TECHNICAL SPECIFICATIONS
Construction |
machine bed of massive aluminum cast |
No. of axes |
4 |
x/y/z pos. range |
165.5 x 108 x 93 mm |
Drives |
Precise ball screw spindles for the 3 linear axes Motor resolution < 1>Ground steel precision guide rails 4 mm lead |
Repetition accuracy linear axes |
± 0,003 mm |
Axis measurement |
Measurement of axes with calibration specimen Automatic axis compensation for exact results |
Housing |
Complete encapsulation of working chamber Automatic safety interlock at the front cover during the machining process |
Working chamber illumination |
yes, with status indication |
Dimensions (W/D/H) |
approx. 450 x 530 x 630 mm |